Teams and Other Peripherals Lose Connection when Switching

When having a look at the USB switching, he found a snag. The USB was set to “Follow Last”, this needed to be changed to “Follow First”.

What “Follow Last” does is leave the switch in a state where all the connect peripherals, i.ie: mics, camera, DSP are linked to the last connected device, even when the device is unplugged. It does not sync the peripherals back to the first connected device. Hence why the MTR was not seeing any camera or mics.

Setting the switch to “Follow First” tells the switch to always send the peripherals back to the MTR when the second (last) device is disconnected.

We hope this helps if you are experiencing this issue.